Three Bodies Side Opening Morgue Refrigerator, Transfer Options Available
Dimensions:
8′ (243 cm) L x 3’6″ (106 cm) W x 8’7″ (261 cm) H
Shipping Weight:
Approximate Total Shipping Weight (pounds) 1659
Finishes:
- 26 Gauge corrosion resistant stucco embossed coated steel – interior wall exterior wall Interior ceiling
- 20 Gauge stainless steel – exposed wall 26 Gauge smooth galvanized – ceiling topside floor bottom side
- 14 Gauge galvanized – interior floor
KI300
Mechanism:
- (3) Conveyor (KT300) and body trays (JC100)
Weight capacity:
- 375 pounds per tray
KC300
Mechanism:
- (3) Telescopes (KT200) and body trays (JC100)
Weight capacity:
- 375 pounds per tray
Box Description:
- (1) Small ceiling mount encapsulated refrigeration System Opening (for use with non-standard locations)
- (1) 2” Solar powered digital thermometer installed in wall
- (1) Set of 3 card holders
- (1) Set of (3) 83” (210 cm) x 21”(53 cm) side opening door – stainless Int.
- Each solid service door includes magnetic gasket and perimeter frame heater wire
- Raise bottom door to be at 12 3/8″(30 cm)
- (1) Set of (3) door controlled light switches
- (1) Wood blocking at the bottom of the door frames
- (1) Set of (6) hydraulic dampers installed (101717)
- (1) Set of (6) wire cables installed
- (1) Set of (3) Aluminum frame on the interior of the door frame
- (1) Tapping plate material in door sides
- (3) Sets of brackets for hardware
- (1) Set of 2 wrap corners for door section
- (1) Vapor proof light fixture (shipped loose for field installation)
- 28 sq. ft. of ‘.75 “CDX plywood wall backing – (full height on the back wall and all the way to the bottom of the wall with plywood notched for lock holes)
Compressor Technicals:
- (1) CPB050DC-A 4 degrees Celsius operation encapsulated refrigeration system indoor ceiling mount high temperature “off cycle” timer R-404A refrigerant 115-1-60 electrical which meets CEC requirements
- System overall size is 29″ (73 cm) W x 44.5″ (111 cm) L and 14.5″ (35 cm) H 13.3 total system amps. 16.1 minimum circuit amps. 20 maximum fuse size 4.81 EER rating (system capacity 3460 BTU’s/hour at 26.7 degrees Celsius ambient temperature)
- Calculated load for cooler (4.0 degrees Celsius) is 1901 BTU’s/hour calculated from 24 degrees Celsius ambient temperature 20 minutes of open door time per 24 hours for (3) 83″ (210 cm) x 21″ (53 cm) side opening door opening into 24 degrees Celsius ambient (normal usage) no vent air no people working in the room no additional electrical load and 175 pounds of cadavers entering at 24 degrees Celsius to be cooled in 24 hours.
- All calculations are based on data supplied by ASHRAE publications
Clarification:
- Price does not include taxes bonding installation or freight
- Includes conveyors (KT300) and body trays (JC100), KI300
- Includes telescopes (KT200) and body trays (JC100), KC300
- Facility is responsible for field verification
- Warranty: 18-month parts and labor 5-year compressor 15-year walk-in panel
- Refrigeration units shipped unassembled and an assembly manual is included.
Description
Side opening morgue refrigerators are designed with individual doors. A conveyor or telescope mechanism fully supports the body tray. When the door is opened, the body tray and cadaver are displayed in full side view.
Openings
- Conveyor
- Telescoping